Click herer for Manual & Parts Information

Product No. ACE4527

initially introduced to the hobby market in the 1980's, it has remained the most recognizable amphibious model airplane in the world. Many thousands of these models have been flown over the years.

Specification

Wing Span: 59.5 "
Wing Area: 725 in.
Length: 54"
Weight: 7 lbs.
Req. Engine: .40 - .46 - 2 Cycle
.54 - .60 - 4 Cycle
Req. Radio: 4 Channel

To say the Seamaster is a classic is a vast understatement. In the last few decades, tens of thousands of Seamaster's have flown over the waters of the world, and memories of this enduring airplane remain in the hearts of every modeler who has owned one.

Now you can experience the thrill of flight combined with the "call of the sea" without taking the time to build a kit.
Ace R/C's new Seamaster 40 ARF is completely built and covered with UltraCote® so you can head for the water in a fraction of the time. Spend a few minutes for final assembly, install a radio and engine, and you are ready to load up. If you are a landlubber, the Seamaster converts from a seaplane to a land plane in a few minutes, making it a true amphibian.

Features

• Completely built by skilled craftsmen and covered in Ultracote®
• Rugged ply/balsa construction
• Blow-molded engine pod is both sturdy and good looking
• Complete hardware with tank, spinner, and wheels included
• Converts from a seaplane to a land plane in minutes
• Pre-built one-piece main wing with complete hardware
• Already equipped for land or sea flight, with optional landing gear in kit
• Engine Mounted on top of wing to reduce water spray and prop strikes on water

Accessories Needed

• Radio Set - Transmitter (4 channels), Standard Servos - x5, Receiver, Battery, Foam, Rubber Band.
• Engine - Airplane engine (PRO-46 or F-54s), Glow Plug, Glow Fuel (10% - 15%), 1.5V Glow Starter,
  12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.
• Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Slow setting Cyanocrylate adhesive (thick CA),
  10 minute Epoxy (fast), 20-30 minute Epoxy (slow), Zap-a-dap-a-goo, Shoe -goo or equivalent, Clear silicone seal
• Tools - Ruler, Hobby knife and blades, Scissors, Steel straight edge, Long nose pliers and diagonal cutting pliers, Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3/32", 5/32", 3/16"), Straight building board, Heat sealing iron.
  
  

Parts List

Part No. Description Contains AS6058 Fuselage Set Fuselage-x1, Front hatch-x1, Rear hatch-x1, Servo rail mount-x4, Tapping screw 2x8mm-x8, Servo rail-x2, Plastic keel-x1 AS6181 Main Wing Set Main Wing-x1, Torque rod horn-x2, Aileron servo tail-x1 AS6064 Engine Pod Set Engine pod-x1, Self-tap screw 2x8mm-x8 AS6071 Engine Pylon Set Self-tap screw 3x34mm-x2, Servo tape-x1, Engine pylon-x1, Servo tape-x1, Self-tap screw4x16mm-x1 AS6068 Tip Float Set Velcro-x4, Tip float-x2 AS6069 Adjustable Engine Mount Engine mount plate-x1, Beam-x2(left/right), Self-tap screw 3x15mm-x4, Screw 6/32x25mm-x4, Blind nut-x4 AS6023 Control Horn Set Screw 2x12mm-x4, Control horn-x2, Back plate-x2 3263 Fuel Tank Set Silicone tube-x1, Stopper-x1, Straight nipple-x1, Cap-x1, Clunk-x1, 90° nipple-x1, 300cc tank-x1 3282B Spinner Set Self-tap screw 3x12mm-x2, Back plate-x1, Spinner-x1 AS6066 Wing Bolt Set Socket screw 4x40-x2, Blind nut-x2, Washer-x2 AS6062 Linkage Set Self-tap screw 4x8mm-x1, Pushrod clamp-x1, Clevis-x4, Outer nyrod-x2, Inner nyrod-x2, tdreaded stud-x4, Music wire-x2 3152 Aileron Pushrods Set tdreaded rod-x2, Clevis-x2 PE0009 Hardware Set EZ Connect, set screw & nut-x2, Allen wrench-x1 AS6060 Horizontal Tail Set Stabilizer/Elevator-x1, Nyrod spacer-x1 AS6061 Vertical Tail Set Vertical fin/rudder-x1, CA hinge-x3 AS6070 Water Rudder Set Water rudder-x1, Locknut 4mm-x1, Screw 4x16mm-x1 AS6063 Main Landing Gear Set Collar-x4, Screw 3x5mm-x4, Left landing gear-x1 Right landing gear-x1 3257 Wheel Wheel 2 3/4"-x2 3254 Wheel Wheel 2"-x2 AS6067 Decal Seamaster Decal Set-x1 AS6065 Nose Gear Set Nose gear-x1, Steering arm-x1, Steering arm collar-x1, Self-tap screw 3x15mm-x4, Nose gear mount-x1, Collar-x3, Screw 3x15mm-x3 AS6072 Nose Cone Set Nose cone-x1, Self-tap screw 2x8mm-x4